asMODus Spruzza 80 Watt Squonker Kit
Here is the asMODus Spruzza 80 WATT Squonker Kit
The asMODus Spruzza Squonker is a small ad neat mod that packs out a huge 80Wattss of power using 1 x 18650 battery (sold separately).
The Spruzza features new technology asMODus have developed called the SSS (Smart Siphon System) which will revolutionise the squonk style platform. The SSS system utilises a pump located on the body of the mod that siphons e-liquid through the 510 pin and pumps juice into your squonk ready RDA. The internal juice chamber of the Spruzza hold’s an impressive 6ml of juice.
WARNING: DO NOT DISMANTLE THE SSS SYSTEM AS YOU WILL BREAK THE VACUUM SEAL AND YOUR MOD WILL BE USELESS
The Asmodus Spruzza 80w Squonker Kit is powered by a GX-80-HUT chip which allows for wattage (power) mode, temperature control modes, TFR, TCR, and our new “Curve” mode. Curve allows the user to imitate the abilities of temperature control mode by allowing the user to set 5 different wattage over time presets for up to 10 seconds. For example if you were running a Clapton style coil, which typically require a little ramping to get to a firing sweet spot, you can set the device to fire at 80 watts for .2 seconds and then 65 watts for 5 seconds. This will quickly ramp the coils and lower the wattage after the ramp to provide a smooth hit.
The Asmodus Spruzza 80w Squonker Kit has two removable doors. One door opens to allow access to the SSS system for filling and opening the other door allows you to easily access the battery. The SSS system and the battery tray are on opposite sides of the mod so that is the SSS is overfilled and spills, it will not leak into the insides of the mod.
Sitting on top of the Spruzza kit is the Fonte RDA
The Fonte is a 24mm RDA that comes squonk ready. The Fonte is constructed with high quality SS316 and features a heat sink on the top of the cap. The cap is topped with a Delrin wide bore drip tip to maximize intake. The Fonte airflow is easily adjustable by simply spinning the sleeve of the cap. The airflow inlets on the sides of the cap are arched downwards on the ends of the inlets which channel airflow to the bottom of the deck. This will create a bottom airflow effect with a side airflow cap!